First-timer's Guide to Installing a New Shower Unit

Call Today

We've encountered this great article on Simple ways to Install a Shower Cubicle on Your Own below on the internet and decided it made good sense to share it with you here.


How to Install a One-Piece Shower Unit
An effective shower setup requires careful preparation as well as a great deal of work. In most cases, you will certainly need to do 3 types of tasks: mounting walls, setting up the plumbing, and completing walls.

Prep work


Firstly, you should pick the type of shower that you want to mount. It is very important to ascertain whether the selected shower can managing certain systems and also can regulate a safe level of water with the central heating boiler. The majority of shower units nowadays are designed to be flexible to different water stress (such as saved warm water as well as chilly keys).
It is additionally vital to take into account the water stress and also the preparation of the piping and drain for the shower

Various Types of Shower Units


  • Push-on Mixer: The pipe and spray parts of the push-on mixer shower device can be connected to the bathroom faucet as per your requirement, and also the water temperature level can be changed through the faucets. Push-on mixers are cheap and extremely straightforward to set up. However, although the pipe link is basic, it is easily removed. Additionally, it is inconvenient to readjust the temperature.

  • Bath/Shower Mixer: The pipe and spray of this sort of shower are integrated with a bathroom mixer tap, as well as the temperature level can be changed via the bath taps. It is a really low-cost option as well as no added plumbing is involved. Nevertheless, the bath/shower mixers also struggle with bothersome temperature control choices.

  • Guidebook Mixer: The tube and spray of a manual mixer shower system belong of the wall surface device and also the cold and hot water materials are linked to a single valve The temperature as well as pressure of the water are regulated via either one or a selection of handles (in a lot more costly showers). Although temperature level control is a lot easier in hands-on mixer types, they are more expensive than the formerly mentioned mixers. They additionally require added plumbing of hot and cold water supply pipes.

  • Thermostatic Mixer: The hose and also spray of this shower kind are a part of the wall surface system and the hot and cold water products are connected to a solitary shutoff right here also. It is total with a built-in stabiliser to self-adjust the water temperature level as well as to prevent it from ending up being too warm. Among the biggest advantages of a thermostatic mixer shower kind includes hassle-free temperature control. Nonetheless, it is the most costly of the various mixer options.

  • Power Shower: A power shower is a single device including an effective electrical pump that is capable of changing both the water stress and temperature. This kind of shower can be fitted if there is water from a cold water tank and also a warm water cyndrical tube. A power shower makes the change of both stress and also temperature easy. On the other hand, it is unsuitable for water heated directly by the shower or where the water is provided by a mix central heating boiler under keys pressure.

  • Electric Shower: An electric shower is plumbed into a mains cold water supply and it heats the water electrically. It is important to note that for this shower type to be mounted, the mains pressure needs to be at least 0.7 kg/sq centimeters (10lb/sq in). The device enables the temperature level and also stress to be readjusted using a knob. Designs with temperature level stabilisers are better as they remain untouched by various other taps elsewhere in operation within the home. A significant drawback of electrical showers is that the control handle only enables the alternative of high temperatures at much less stress, or reduced temperature levels at a greater stress. This is problematic in the winter when the spray is frequently weak as well as the keys water is cooler. Nevertheless, this trouble is taken on in some versions which are available with a winter/summer setting.

  • Method


    Depending upon the kind of shower you want to set up, the shower head need to either be fitted in order to prevent its contact with the water in the bathroom listed below or the base tray, or it needs to have a check shutoff.
    Prior to starting, it is a good idea to note the placements of the shower head and also control, as well as to prepare the pipe-work included. Furthermore, the drain system to eliminate the drainage will need to be prepared. Both settings of the cable television route as well as the shower switch will likewise need to be thought about if an instant or electric shower device is being mounted.
    Utilize the direction guide supplied with the shower unit to fit the shower control.Before fitting the pipes that will supply the water to the shower system, it is necessary to remove the water supply. In order to protect the pipelines, they should be given a water-proof covering as well as likewise fitted with separating valves. The pipes can then be buried into the wall surface and also glued over to neaten the general look.
    Fit the base tray, shower head, and fittings.
    Connect the major shower control to the pipes that will certainly be providing the water (This might need a women screw thread adapter).
    Reconnect the water supply and also test the pipes for any kind of leakages, as some may require tightening up.
    If you are mounting an electrical shower, remember to turn off the electricity supply before making any electrical connections. Once these connections have been made (there need to be support within the user's manual), the power supply can be switched back on.

    Adjusting Water Stress to Fit Your Shower


    The cold water reservoir can be lifted to a higher elevation (often as low as 150mm (6inches)) by installation a solid wooden support underneath it - potentially composed of struts and blockboards. If you choose this option, the major and also circulation pipes will additionally need to be increased to satisfy the brand-new elevation of the reservoir.
    Alternatively, a booster pump (a single pump or a dual/twin pump) can be fitted. Whichever type is chosen, it must be attached right into the power supply in order to run.

    Piping and also Water drainage


    It is best to make use of 15mm size supply pipelines, as well as make the runs to the shower as short and straight as feasible so regarding keep maximum pressure and also reduce heat loss. Additionally, by reducing making use of arm joints for pipeline corners, you can lower the resistance in the flow of the water supply. You can attain this by bending the pipelines instead.

    A Lot Of Common Errors


  • Breaching or disregarding neighborhood code restrictions.

  • Making use of pipes that are as well tiny.

  • Affixing copper to galvanized without utilizing a brass or dielectric fitting between both.

  • Not utilizing tape or pipe substance at threaded joints.

  • Uneven your fixtures when mounting them.

  • Not setting up an air space loading for fixtures.

  • Reducing supply stub outs too brief to install the shutoff valves onto after the ended up wall remains in place.

  • Not properly lining up tubes into installations or quit shutoffs. (Compeling the nut onto the compression ring at an angle when the tubes is at an angle will certainly trigger a leakage.).

  • When turning the water back on in your house, always run the outside hose valve or flush your commodes to hemorrhage dirt and also air from the lines. This particles can trigger problems in your sink taps and other plumbing trim.



  • The best type of shower enclosure


    South India Agency (SIA), is a leading, fast-growing company that homes the best bathroom and hardware accessories of quality products, with an established and well-networked channel partners combined to provide unmatched service both for residential and commercial requirements, from wardrobe fittings and accessories to furniture accessories. SIA is known for innovative products from reputed Firms.


    When it is about your new bathroom fitting or upgrading one in the existing premises, think only to install the best accessories and fittings. Daily, you are going to use it to freshen up your day. It is something you’re going to use every day for the next couple of years. A place to rejuvenate yourself in the mornings and allow you to unfold after a long tiresome day. From wash basin to the minutest detail fittings for your bathroom needs like Tooth Brush Holders, Shelves, Soap Dishes, Baskets, Dispensers, Tumblers, Bathroom Ceiling Lights & Wall Lights, Exhaust Fans, toilet paper holders, etc are available here.


    Are you confused?


    You can visit SIA, take their opinion, and see the multiple solutions. A diverse range of best bathroom fittings is available.


    If you are looking for Shower enclosures, the right choice could be made from different types of shower enclosures like large showers to hinged shower enclosures depending on what suits your budget and the bathroom size. If the bathroom is spacious enough, then large and walk-in showers are preferred. On the contrary, smaller sizes of bathrooms can use quadrant corner shower enclosures, 3 Sided shower enclosures, Bifold shower enclosures or hinged shower enclosures, etc, which can be used based on the availability of space. SIA is well-known for its quality shower products, made with premium materials, ideal for creating high-quality bathrooms at an affordable price.


    Bathroom shower cubicles are made of thick glasses that are sturdy and leak-proof. They also are easy to maintain, strong, and heat resilient; making them equally safe for kids and adults. The cubicles are kept in place using chrome-plated brass fixtures, which are rust-free and elegant. Other materials that are used include plastic and thin waterproof materials for the shower screen.


    As cited here, there are different ranges of bathroom accessories in SIA and hence space in the bathroom is to be considered before purchasing any shower cubicles. Ideally, the shower enclosure could be near the bathtub, considering constraints of space. It can be in line with your bathroom style and other accessories. Sliding doors, when used in shower enclosures, are best suited for a rectangular bathroom where the allotted space is less. Sliding doors offer a comfortable bath without having to be concerned about the water splashing or spilling outside the enclosure.


    Choosing the right shower cubicle as per your budget and matching your bathroom needs are of prime importance. At South India Agencies we have a wide range of bathroom fittings and accessories. Finding the right shower cubicle that fits your budget should not be a problem. Shower cubicles from South India Agencies are pioneered with precision and can be tailor-made so that your bathroom space and size requirements are met. A shower cubicle enhances the look and feels of the bathroom and blends into the color scheme. Our display center in Bangalore is a one-stop shop for all your bathroom fittings and accessories.


    South India Agencies (SIA) is a Display Centre with a wide range of architectural and builders’ hardware associated with 80+ powerful brands, for all your requirements under one roof.

    https://southindiaagencies.com/blog/best-type-of-shower-enclosure/


    How to Build a Shower Enclosure for Your DIY Bathroom

    Do you enjoy more info about How to Install a Direct-to-Stud Shower Enclosure? Give a short review down the page. We will be interested to hear your thoughts about this review. Hoping that you visit us again in the future. Enjoyed our write-up? Please share it. Help somebody else locate it. Thanks so much for going through it.


    Quote & Schedule

    Leave a Reply

    Your email address will not be published. Required fields are marked *